Request information
Home  |  Insulation

Flexible Elastomeric Foam

Closed cell elastomeric foam insulation is fiber free, prevents condensation, and resists mold without a separate, fragile vapor retarder. It provides long-term durability, protection, and peace-of-mind performance. It is the right material for insulating Chilled water, Plumbing and Ductwork. The smooth, durable external surface is easily cleaned and resists dirt, moisture absorption, and microbial growth – even if torn or punctured. Elastomeric foam has a higher temperature limit and is more flexible than polyethylene CCF, able to withstand service temperature spikes without permanent failure.

Armaflex® Flexible Elastomeric Pipe Covering by Armacell

Armaflex® Flexible Elastomeric Pipe Covering by Armacell

AP/Armaflex mold resistant insulation is now made with added protection against mold on duct liner and mechanical insulation. Every AP Armaflex product for air ducts and mechanical systems now utilizes advanced MICROBAN antimicrobial technology. (See literature below for more information regarding MICROBAN.)

Armaflex Pipe Insulation is used to retard heat gain and control condensation drip from chilled water and refrigeration systems. It also efficiently reduces heat flow for hot-water plumbing and liquid-heating and dual temperature piping. The recommended temperature usage range for Armaflex Pipe Insulation is -297°F to +220°F (-183°C to +105°C). For use on cold pipes, AP/Armaflex Pipe Insulation thicknesses have been calculated to control condensation on the insulation outer surface, as shown in the table of thickness recommendations.

Armaflex with Self Sealing Laps results in 2x faster installation than standard Armaflex resulting in increased speed, performance, and savings.

Armaflex® Flexible Elastomeric Sheets and Rolls by Armacell

Armaflex® Flexible Elastomeric Sheets and Rolls by Armacell

AP/Armaflex® Sheet & Roll Insulation is a flexible elastomeric thermal insulation, black in color. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. Armaflex's superior effectiveness is achived through the expanded closed-cell structure. It is manufactured without the use of CFC's, HCFC's, or HFC's. Armaflex is also formaldehyde-free, dust free, low VOCs, fiber free and resists mold and mildew.

AP/Armaflex mold resistant insulation is now made with added protection against mold on duct liner and mechanical insulation. Every AP Armaflex product for air ducts and mechanical systems now utilizes advanced MICROBAN antimicrobial technology. (See literature below for more information regarding MICROBAN.)

Armaflex® is available with self-adhering backing for efficiency and ease of use.

ArmaTuff® Coating Systems for Outdoor Applications

ArmaTuff® Coating Systems for Outdoor Applications

Laminated Armaflex® products for exeptional UV resistance and durability. ArmaTuff is the top of the Armacell Coating Systems for outdoor applications. It is a flexible elastomeric insulation product with excellent thermal properties. The closed cell nature of the product offers exceptional water vapor transmission properties.

ArmaTuff® is readily supplied in both sheet and roll forms and sheets are furnished with or without pressure sensitive adhesive. The product is primarily for exterior applications, where UV and chemical degradation can be an issue and superior durability is required.

NH/Armaflex® Pipe Covering by Armacell

NH/Armaflex® Pipe Covering by Armacell

NH/Armaflex® Pipe Covering is a nonhalogen flexible elastomeric thermal pipe insulation, gray in color, supplied as unslit tubing in nominal wall thicknesses of 1/2" and 3/4" in sizes from 3/8" through 8" IPS. Sheets are supplied 36"x 48" in thicknesses of 1/2", 3/4", and 1". NH/Armaflex® was specially developed by Armacell to minimize the density of smoke and eliminate corrosive acid gases from combustion. NH/Armaflex® will not carry a progressive flame, and is formulated without chlorine, bromines, or PVC.

NH/Armaflex® Sheet and Roll

NH/Armaflex® Sheet and Roll

NH/Armaflex® Sheet and Roll is used as insulation and protection for tanks, air ducts, and to prevent stress corrosion with US Navy applications, General shipbuilding, IMO (International Maritime Organization), nuclear power plants, and other areas where nonhalogenated or chlorine-free materials may be required.

Flexible Elastomeric Foam Accessories

Flexible Elastomeric Foam Accessories

Use Armacell's Elastomeric Foam Accessories to apply an efficient, clean, cost saving finish to your elastomeric foam installation. Armacell's accessories include tape, pipe hangers, adhesives, and finishes. Each is designed for ease of installation and a professional appearance to your application.